When silicone product manufacturers use molds for a long time, we all need to do some maintenance. This will not only extend the life of the mold, but also help us not suffer any obstacles in the process of use, and it can also reduce mold repairs. Costs and errors, etc. What are the basic maintenance of the mold?

 When silicone product manufacturers have used molds for a long time, need to do some maintenance. This will not only extend the life of the mold, but also help us not suffer any obstacles in the process of using it, and it can also reduce the cost of mold repair. So what are the basic maintenance of the mold?

 1. In normal use, should check whether the various movable parts of the mold can operate normally, and whether the vent and waterway are blocked by waste silicone products. This is the most important step in  mold maintenance. The probability of mold being rust is very high if the silicone waste is blocked for a long time without any gaps and air, and oil cannot enter

 2. In addition to regular maintenance, regular inspections cannot be ignored. Check whether the screws of the mold are loose, whether the wear-resistant sheet is damaged, whether the spring can be normally elastic, etc.;

 3. When the mold is out of production for a period of time, it is necessary to clean the mold to keep it in a closed condition to prevent rust; and pack it and put it in a box.

 4. In fact, the maintenance methods are very simple. As long as we pay more attention to them in normal use, and all these maintenance actions, JWT rubber will generally perform mold maintenance once a month. If mold maintenance is not carried out for a long time, it will cause to mold loss and poor product production.