China Top 3 ODM Silicone & Rubber Parts Manufacturer. Tel:+86 18046216971(Sally) E-mail:admin@jwtrubber.com‍ Sitemap |

Current page:

Home

/

Blog

/

LSR Molding Process Equipments

LSR Molding Process Equipments

In order for the liquid injection molding process to fully occur, several mechanical components must be in place. Typically, a molding machine requires a metered pumping device in conjunction with an injection unit—a dynamic or static mixer is attached. An integrated system can aid in precision and process efficiency. The critical components of a liquid injection molding machine include:
Injectors. An injecting device is responsible for pressurizing the liquid silicone to aid in the injection of the material into the pumping section of the machine. Pressure and injection rate can be adjusted at the operatpr’s discretion.
Metering Units. Metering units pump the two primary liquid materials, the catalyst and the base forming silicone, ensuring that the two materials maintain a constant ratio while being simultaneously released.
Supply Drums. Supply drums, also called plungers, serve as the primary containers for mixing materials. Both the supply drums and a container of pigment connect to the main pumping system.
Mixers. A static or dynamic mixer combines materials after they exit the metering units. Once combined, pressure is used to drive the mixture into a designated mold.
Nozzle. To facilitate the deposition of the mixture into the mold, a nozzle is used. Often, the nozzle features an automatic shut-off valve to help prevent leaking and overfilling the mold.
Mold Clamp. A mold clamp secures the mold during the injection molding process, and opens the mold upon completion.

Free Download WordPress Themes
Download Nulled WordPress Themes
Download Best WordPress Themes Free Download
Download Premium WordPress Themes Free
online free course
download lenevo firmware
Download Best WordPress Themes Free Download
online free course

Jul-09-2018

admin