China Top 3 ODM Silicone & Rubber Parts Manufacturer. Tel:+86 18046216971(Sally) E-mail:admin@jwtrubber.com‍ Sitemap |

Current page:

Home

/

Blog

/

How to Choose Right Mould Making rtv-2 Silicone rubber

How to Choose Right Mould Making rtv-2 Silicone rubber

How to Choose Right Mould Making Silicone for Different Products .
As you know, the hardness of the mould making silicone rubber ranges from below 0 shore A to 60 shore A or even higher.
And if the hardness is not suitable, the silicone mould would meet some problems, such as nondurable, less duplication times, shrinkage ect.
Then how to choose right mould making silicone for different products?
Normally, different silicone should be chosen according to different product’s features:
For example:
– For products (within 20cm)
with intricate designs, soft silicone is suitable, such as 10-20 shore A.
– For products (20cm-80cm)
with intricate designs, 20-25 shore A is suitable.
with simple designs, 25-30 shore A is suitable.
– For products (80cm-150cm)
with intricate designs, 30 shore A is suitable.
with simple designs, 30-35 shore A is suitable.
– For products (more than 150cm)
with intricate designs, 30-35 shore a A is suitable.
with simple designs, 35-40 shore A is suitable.
Wish this share will be helpful for you, you can pass this silicone technology to your sales, wish you booming business.
Thank you for reading!

Download WordPress Themes
Download Nulled WordPress Themes
Free Download WordPress Themes
Download Nulled WordPress Themes
free download udemy paid course
download samsung firmware
Download WordPress Themes Free
ZG93bmxvYWQgbHluZGEgY291cnNlIGZyZWU=

May-07-2018

admin